Factors Affecting Pin Hole Damage of Stamping Die and Solutions

When disassembling the stamping die, it is easy to damage the accessories of the stamping die if the disassembly is not carried out carefully, and the pin holes of the stamping die may be damaged accidentally, which will not be worth the loss. Therefore, we must be careful when disassembling the sta... Read more

Causes and solutions of mold rust

The mould will also be rusty during use. The rust of the mould will directly market the aesthetics of the manufactured workpiece, and even affect the quality of the workpiece. Therefore, when we use the mould, we must figure out why the mould will grow. Rust, what are the ways to solve mould rust? T... Read more

What are the precautions for stamping die installation

Stamping die is a special process equipment for processing materials into parts. Performance and use are important to the quality of the parts. Therefore, when we install stamping dies, we must install them according to specific regulations. Otherwise, it will not only affect The normal use of the m... Read more

Factors that cause contamination before mould cleaning

As an important tool for workpiece manufacturing, we must keep the mould clean when we use it, and there should be no pollution components, otherwise it will cause the quality of the workpiece production or the surface to be uneven, and even affect the performance of the workpiece, and cause polluti... Read more

Measures to prevent defects in mould processing

Most of our commonly used workpieces are manufactured by moulds. Therefore, when manufacturers are manufacturing, if they are developed in batches, some defects will inevitably occur. In order to maximize the performance utilization rate of the workpieces, we can adopt Preventive measures to avoid d... Read more

Main points of maintenance of stamping continuous die

In the process of using the continuous die, in order to improve its performance and use and prolong its life, it needs to be maintained. However, four main points need to be paid attention to during the maintenance process, so as to grasp the focus of the continuous die and reduce the use of the die... Read more

How to improve medical treatment mould manufacturing accuracy and surface quality

1. Reasonably choose the amount of grinding, and use a fine grinding method with a small radial feed or even fine grinding. If the radial feed rate and the grinding wheel speed are appropriately reduced, and the axial feed rate is increased, the contact area between the grinding wheel and the workpi... Read more

Commonly used polishing methods for medical device mould processing

1. Chemical polishing Chemical polishing is to make the surface microscopic convex part of the material in the chemical medium dissolve preferentially than the concave part, thereby obtaining a smooth surface. The main advantage of this method is that it does not require complex equipment, can polis... Read more

Types and characteristics of medical device stamping die materials

The materials for making medical device stamping dies include steel, cemented carbide, steel-bonded cemented carbide, zinc-based alloy, low melting point alloy, aluminum bronze, polymer materials and so on. At present, most of the materials used to make medical device stamping dies are steel. The ty... Read more

Common abnormal factors and solutions in injection moulding

During the injection moulding process, some abnormal phenomena are prone to occur, such as: cracks, ripples on the surface of the product, reduced brittle strength of the product, difficult demoulding, unstable product size, unstable product size, peeling and delamination of the product, weld marks,... Read more

Rules of die-casting mould installation

The installation of the die-casting mould is very critical, so we need to install it according to the relevant rules to prevent damage to the die-casting mould. 1. The installation position of the mould conforms to the design requirements, and the distance between the mould expansion force center an... Read more

Six requirements when choosing mould parts

In order to better use the mould, we need to choose according to specific requirements when purchasing mould accessories.The common requirements for mould accessories mainly include the following:   1: Simple installation and how to maintain the parts: Check whether the delivery instructions are sim... Read more